Telephone.

Ci-dessous un extrait traitant le sujet : Telephone.. Ce document contient 6790 mots. Pour le télécharger en entier, envoyez-nous un de vos documents grâce à notre système d’échange gratuit de ressources numériques ou achetez-le pour la modique somme d’un euro symbolique. Cette aide totalement rédigée en format pdf sera utile aux lycéens ou étudiants ayant un devoir à réaliser ou une leçon à approfondir en : Echange

---

Telephone.
I

INTRODUCTION

Telephone, instrument that sends and receives voice messages and data. Telephones convert speech and data to electrical energy, which is sent great distances.
Modern technology has made the telephone much more portable, convenient, and versatile. Lightweight, handheld cell phones make it possible to place and receive calls
on-the-go in many locations and at any time. Traditional telephones now link with radio, Internet, and satellite services as part of global telecommunications.
Telephones play a vital role in business and the economy, as well as in the personal and family lives of individuals. Telephones also save lives and provide security by
making it possible to summon help quickly in an emergency (as in the 911 service in the United States) and contact law enforcement or medical services. The telephone
has other uses that do not involve one person talking to another. Instead, an automated menu can allow a caller to pay bills, obtain prerecorded information, or retrieve
messages from an answering machine. In 2004 there were 606 main telephone lines per 1,000 people in the United States and 566 main telephone lines per 1,000
people in Canada.
About half of the information passing through telephone lines occurs entirely between special-purpose telephones, such as computers with modems. A modem converts
the digital bits of a computer's output to an audio tone, which is then converted to an electrical signal and passed over telephone lines to be decoded by a modem
attached to a computer at the receiving end. Another special-purpose telephone is a facsimile machine, or fax machine, which produces a duplicate of a document at a
distant point.

II

PARTS OF A TELEPHONE

A basic telephone set contains a transmitter that transfers the caller's voice; a receiver that amplifies sound from an incoming call; a rotary or push-button dial; a ringer
or alerter; and a small assembly of electrical parts, called the antisidetone network, that keeps the caller's voice from sounding too loud through the receiver. If it is a
two-piece telephone set, the transmitter and receiver are mounted in the handset, the ringer is typically in the base, and the dial may be in either the base or handset.
The handset cord connects the base to the handset, and the line cord connects the telephone to the telephone line.
More sophisticated telephones may vary from this pattern. A speakerphone has a microphone and speaker in the base in addition to the transmitter and receiver in the
handset. Speakerphones allow callers' hands to be free, and allow more than two people to listen and speak during a call. In a cordless phone, the handset cord is
replaced by a radio link between the handset and base, but a line cord is still used. This allows a caller to move about in a limited area while on the telephone. A cellular
phone has extremely miniaturized components that make it possible to combine the base and handset into one handheld unit. No line or handset cords are needed with
a cellular phone. A cellular phone permits more mobility than a cordless phone.

A

Transmitter

There are two common kinds of telephone transmitters: the carbon transmitter and the electret transmitter. The carbon transmitter is constructed by placing carbon
granules between metal plates called electrodes. One of the metal plates is a thin diaphragm that takes variations in pressure caused by sound waves and transmits
these variations to the carbon granules. The electrodes conduct electricity that flows through the carbon. Variations in pressure caused by sound waves hitting the
diaphragm cause the electrical resistance of the carbon to vary--when the grains are squeezed together, they conduct electricity more easily; and when they are far
apart, they conduct electricity less efficiently. The resultant current varies with the sound-wave pressure applied to the transmitter.
The electret transmitter is composed of a thin disk of metal-coated plastic and a thicker, hollow metal disk. In the handset, the plastic disk is held slightly above most of
the metal disk. The plastic disk is electrically charged, and an electric field is created in the space where the disks do not touch. Sound waves from the caller's voice
cause the plastic disk to vibrate, which changes the distance between the disks, and so changes the intensity of the electric field between them. The variations in the
electric field are translated into variations of electric current, which travels across telephone lines. An amplifier using transistors is needed with an electret transmitter to
obtain sufficiently strong variations of electric current.

B

Receiver

The receiver of a telephone set is made from a flat ring of magnetic material with a short cuff of the same material attached to the ring's outer rim. Underneath the
magnetic ring and inside the magnetic cuff is a coil of wire through which electric current, representing the sounds from the distant telephone, flows. A thin diaphragm
of magnetic material is suspended from the inside edges of the magnetic ring so it is positioned between the magnet and the coil. The magnetic field created by the
magnet changes with the current in the coil and makes the diaphragm vibrate. The vibrating diaphragm creates sound waves that replicate the sounds that were
transformed into electricity by the other person's transmitter.

C

Alerter

The alerter in a telephone is usually called the ringer, because for most of the telephone's history, a bell was used to indicate a call. The alerter responds only to a
special frequency of electricity that is sent by the exchange in response to the request for that telephone number. Creating an electronic replacement for the bell that
can provide a pleasing yet attention-getting sound at a reasonable cost was a surprisingly difficult task. For many people, the sound of a bell is still preferable to the
sound of an electronic alerter. However, since a mechanical bell requires a certain amount of space in the telephone to be effective, smaller telephones mandate the use
of electronic alerters.

D

Dial

The telephone dial has undergone major changes in its history. Two forms of dialing still exist within the telephone system: dial pulse from a rotary dial, and
multifrequency tone, which is commonly called by its original trade name of Touch-Tone, from a push-button dial.
In a rotary dial, the numerals one to nine, followed by zero, are placed in a circle behind round holes in a movable plate. The user places a finger in the hole
corresponding to the desired digit and rotates the movable plate clockwise until the user's finger hits the finger stop; then the user removes the finger. A spring
mechanism causes the plate to return to its starting position, and, while the plate is turning, the mechanism opens an electrical switch the number of times equal to the
dial digit. Zero receives ten switch openings since it is the last digit on the dial. The result is a number of 'dial pulses' in the electrical current flowing between the
telephone set and the exchange. Equipment at the exchange counts these pulses to determine the number being called.
The rotary dial has been used since the 1920s. But mechanical dials are expensive to repair and the rotary-dialing process itself is slow, especially if a long string of

digits is dialed. The development of inexpensive and reliable amplification provided by the introduction of the transistor in the 1960s made practical the design of a
dialing system based on the transmission of relatively low power tones instead of the higher-power dial pulses.
Today most telephones have push buttons instead of a rotary dial. Touch-Tone is an optional service, and telephone companies still maintain the ability to receive pulse
dialing. Push-button telephones usually have a switch on the base that the customer can set to determine whether the telephone will send pulses or tones.

E

Business Telephones

A large business will usually have its own switching machine called a Private Branch Exchange (PBX), with hundreds or possibly thousands of lines, all of which can be
reached by dialing one number. The extension telephones connected to the large business's PBX are often identical to the simple single-line instruments used in
residences. The telephones used by small businesses, which do not have their own PBX, must incorporate the capability of accessing several telephone lines and are
called multiline sets. The small-business environment usually requires the capability of transferring calls from one set to another as well as intercom calls, which allow
one employee to call another without using an outside telephone line.

F

Cellular Telephones

A cellular telephone is designed to give the user maximum freedom of movement while using a telephone. A cellular telephone uses radio signals to communicate
between the set and an antenna. The served area is divided into cells something like a honeycomb, and an antenna is placed within each cell and connected by
telephone lines to one exchange devoted to cellular-telephone calls. This exchange connects cellular telephones to one another or transfers the call to a regular
exchange if the call is between a cellular telephone and a noncellular telephone. The special cellular exchange, through computer control, selects the antenna closest to
the telephone when service is requested. As the telephone roams, the exchange automatically determines when to change the serving cell based on the power of the
radio signal received simultaneously at adjacent sites. This change occurs without interrupting conversation. Practical power considerations limit the distance between
the telephone and the nearest cellular antenna, and since cellular phones use radio signals, it is very easy for unauthorized people to access communications carried out
over cellular phones. Currently, digital cellular phones are gaining in popularity because the radio signals are harder to intercept and decode.

III

MAKING A TELEPHONE CALL

A telephone call starts when the caller lifts a handset off the base. This closes an electrical switch that initiates the flow of a steady electric current over the line between
the user's location and the exchange. The exchange detects the current and returns a dial tone, a precise combination of two notes that lets a caller know the line is
ready.
Once the dial tone is heard, the caller uses a rotary or push-button dial mounted either on the handset or base to enter a sequence of digits, the telephone number of
the called party. The switching equipment in the exchange removes the dial tone from the line after the first digit is received and, after receiving the last digit,
determines whether the called party is in the same exchange or a different exchange. If the called party is in the same exchange, bursts of ringing current are applied
to the called party's line. Each telephone contains a ringer that responds to a specific electric frequency. When the called party answers the telephone by picking up the
handset, steady current starts to flow in the called party's line and is detected by the exchange. The exchange then stops applying ringing and sets up a connection
between the caller and the called party.
If the called party is in a different exchange from the caller, the caller's exchange sets up a connection over the telephone network to the called party's exchange. The
called exchange then handles the process of ringing, detecting an answer, and notifying the calling exchange and billing machinery when the call is completed (in
telephone terminology, a call is completed when the called party answers, not when the conversation is over).
When the conversation is over, one or both parties hang up by replacing their handset on the base, stopping the flow of current. The exchange then initiates the
process of taking down the connection, including notifying billing equipment of the duration of the call if appropriate. Billing equipment may or may not be involved
because calls within the local calling area, which includes several nearby exchanges, may be either flat rate or message rate. In flat-rate service, the subscriber is
allowed an unlimited number of calls for a fixed fee each month. For message-rate subscribers, each call involves a charge that depends on the distance between the
calling and called parties and the duration of the call. A long-distance call is a call out of the local calling area and is always billed as a message-rate call.

A

Switching

Telephone switching equipment interprets the number dialed and then completes a path through the network to the called subscriber. For long-distance calls with
complicated paths through the network, several levels of switching equipment may be needed. The automatic exchange to which the subscriber's telephone is
connected is the lowest level of switching equipment and is called by various names, including local exchange, local office, central-office switch, or, simply, switch. Higher
levels of switching equipment include tandem and toll switches, and are not needed when both caller and called subscribers are within the same local exchange.
Before automatic exchanges were invented, all calls were placed through manual exchanges in which a small light on a switchboard alerted an operator that a subscriber
wanted service. The operator inserted an insulated electrical cable into a jack corresponding to the subscriber requesting service. This allowed the operator and the
subscriber to converse. The caller told the operator the called party's name, and the operator used another cord adjacent to the first to plug into the called party's jack
and then operated a key (another type of electrical switch) that connected ringing current to the called party's telephone. The operator listened for the called party to
answer, and then disconnected to ensure the privacy of the call.
Today there are no telephones served by manual exchanges in the United States. All telephone subscribers are served by automatic exchanges, which perform the
functions of the human operator. The number being dialed is stored and then passed to the exchange's central computer, which in turn operates the switch to complete
the call or routes it to a higher-level switch for further processing.
Today's automatic exchanges use a pair of computers, one running the program that provides service, and the second monitoring the operation of the first, ready to
take over in a few seconds in the event of an equipment failure.
Early telephone exchanges, a grouping of 10,000 individual subscriber numbers, were originally given names corresponding to their town or location within a city, such
as Murray Hill or Market. When the dialing area grew to cover more than one exchange, there was a need for the dial to transmit letters as well as numbers. This
problem was solved by equating three letters to each digit on the dial except for the one and the zero. Each number from two to nine represented three letters, so
there was room for only 24 letters. Q and Z were left off the dial because these letters rarely appear in place-names. In dialing, the first two letters of each exchange
name were used ahead of the rest of the subscriber's number, and all exchange names were standardized as two letters and a digit. Eventually the place-names were
replaced with their equivalent digits, giving us our current U.S. and Canadian seven- or ten-digit telephone numbers. In other parts of the world, a number may consist
of more or less than seven digits.

The greatly expanded information-processing capability of modern computers permits Direct Distance Dialing, with which a subscriber can automatically place a call to a
distant city without needing the services of a human operator to determine the appropriate routing path through the network. Computers in the switching machines
used for long-distance calls store the routing information in their electronic memory. A toll-switching machine may store several different possible routes for a call. As
telephone traffic becomes heavier during the day, some routes may become unavailable. The toll switch will then select a less direct alternate route to permit the
completion of the call.

B

Transmission

Calling from New York City to Hong Kong involves using a path that transmits electrical energy halfway around the world. During the conversation, it is the task of the
transmission system to deliver that energy so that the speech or data is transmitted clearly and free from noise. Since the telephone in New York City does not know
whether it is connected to a telephone next door or to one in Hong Kong, the amount of energy put on the line is not different in either case. However, it requires much
more energy to converse with Hong Kong than with next door because energy is lost in the transmission. The transmission path must provide amplification of the signal
as well as transport.
Analog transmission, in which speech or data is converted directly into a varying electrical current, is suitable for local calls. But once the call involves any significant
distance, the necessary amplification of the analog signal can add so much noise that the received signal becomes unintelligible. For long-distance calls, the signal is
digitized, or converted to a series of pulses that encodes the information.
When an analog electrical signal is digitized, samples of the signal's strength are taken at regular intervals, usually about 8,000 samples per second. Each sample is
converted into a binary form, a number made up of a series of 1s and 0s. This number is easily and swiftly passed through the switching system. Digital transmission
systems are much less subject to interfering noise than are analog systems. The digitized signal can then be passed through a digital-to-analog converter (DAC) at a
point close to the receiving party, and converted to a form that the ear cannot distinguish from the original signal.
There are several ways a digital or analog signal may be transmitted, including coaxial and fiber-optic cables and microwave and longwave radio signals sent along the
ground or bounced off satellites in orbit around the earth. A coaxial wire, like the wire between a videocassette recorder, or VCR (see Video Recording), and a television
set, is an efficient transmission system. A coaxial wire has a conducting tube surrounding another conductor. A coaxial cable contains several coaxial wires in a common
outer covering. The important benefit of a coaxial cable over a cable composed of simple wires is that the coaxial cable is more efficient at carrying very high frequency
currents. This is important because in providing transmission over long distances, many telephone conversations are combined using frequency-modulation (FM)
techniques similar to the combining of many channels in the television system. The combined signal containing hundreds of individual telephone conversations is sent
over one pair of wires in a coaxial cable, so the signal has to be very clear.
Coaxial cable is expensive to install and maintain, especially when it is lying on the ocean floor. Two methods exist for controlling this expense. The first consists of
increasing the capacity of the cable and so spreading the expense over more users. The installation of the first transatlantic submarine coaxial telephone cable in 1956
provided only about 30 channels, but the number of submarine cable channels across the ocean has grown to thousands with the addition of only a few more cables
because of the greatly expanded capacity of each new coaxial cable.
Another telephone-transmission method uses fiber-optic cable, which is made of bundles of optical fibers (see Fiber Optics), long strands of specially made glass encased
in a protective coating. Optical fibers transmit energy in the form of light pulses. The technology is similar to that of the coaxial cable, except that the optical fibers can
handle tens of thousands of conversations simultaneously.
Another approach to long-distance transmission is the use of radio. Before coaxial cables were invented, very powerful longwave (low frequency) radio stations were
used for intercontinental calls. Only a few calls could be in progress at one time, however, and such calls were very expensive. Microwave radio uses very high
frequency radio waves and has the ability to handle a large number of simultaneous conversations over the same microwave link. Because cable does not have to be
installed between microwave towers, this system is usually cheaper than coaxial cable. On land, the coaxial-cable systems are often supplemented with microwave-radio
systems.
The technology of microwave radio is carried one step further by the use of communications satellites. Most communications satellites are in geosynchronous orbit--that
is, they orbit the earth once a day over the equator, so the satellite is always above the same place on the earth's surface. That way, only a single satellite is needed for
continuous service between two points on the surface, provided both points can be seen from the satellite. Even considering the expense of a satellite, this method is
cheaper to install and maintain per channel than using coaxial cables on the ocean floor. Consequently, satellite links are used regularly in long-distance calling. Since
radio waves, while very fast, take time to travel from one point to another, satellite communication does have one serious shortcoming: Because of the satellite's
distance from the earth, there is a noticeable lag in conversational responses. As a result, many calls use a satellite for only one direction of transmission, such as from
the caller to the receiver, and use a ground microwave or coaxial link for receiver-to-caller transmission.
A combination of microwave, coaxial-cable, optical-fiber, and satellite paths now link the major cities of the world. The capacity of each type of system depends on its
age and the territory covered, but capacities generally fall into the following ranges: Frequency modulation over a simple pair of wires like the earliest telephone lines
yields tens of circuits (a circuit can transmit one telephone conversation) per pair; coaxial cable yields hundreds of circuits per pair of conductors, and thousands per
cable; microwave and satellite transmissions yield thousands of circuits per link; and optical fiber has the potential for tens of thousands of circuits per fiber.

IV

TELEPHONE SERVICES

In the United States and Canada, universal service was a stated goal of the telephone industry during the first half of the 20th century--every household was to have
its own telephone. This goal has now been essentially reached, but before it became a reality, the only access many people had to the telephone was through pay (or
public) telephones, usually placed in a neighborhood store. A pay telephone is a telephone that may have special hardware to count and safeguard coins or, more
recently, to read the information off credit cards or calling cards. Additional equipment at the exchange responds to signals from the pay phone to indicate to the
operator or automatic exchange how much money has been deposited or to which account the call will be charged. Today the pay phone still exists, but it usually serves
as a convenience rather than as primary access to the telephone network. The explosive growth of cell phones has greatly reduced the use of pay phones. The FCC
estimates that more than 1 million pay phones have been removed from service since the mid-1990s.
Computer-controlled exchange switches make it possible to offer a variety of extra services to both the residential and the business customer. Some services to which
users may subscribe at extra cost are call waiting, in which a second incoming call, instead of receiving a busy signal, hears normal ringing while the subscriber hears a
beep superimposed on the conversation in progress; and three-way calling, in which a second outgoing call may be placed while one is already in progress so that three
subscribers can then talk to each other. Some services available to users within exchanges with the most-modern transmission systems are: caller ID, in which the
calling party's number is displayed to the receiver (with the calling party's permission--subscribers can elect to make their telephone number hidden from caller-ID
services) on special equipment before the call is answered; and repeat dialing, in which a called number, if busy, will be automatically redialed for a certain amount of
time.

For residential service, voice mail can either be purchased from the telephone company or can be obtained by purchasing an answering machine. An answering machine
usually contains a regular telephone set along with the ability to detect incoming calls and to record and play back messages, with either an audiotape or a digital
system. After a preset number of rings, the answering machine plays a prerecorded message inviting the caller to leave a message to be recorded.
Toll-free 800 numbers are a very popular service. Calls made to a telephone number that has an 800 area code are billed to the called party rather than to the caller.
This is very useful to any business that uses mail-order sales, because it encourages potential customers to call to place orders. A less expensive form of 800-number
service is now available for residential subscribers.
In calling telephone numbers with area codes of 900, the caller is billed an extra charge, often on a per-minute basis. The use of these numbers has ranged from
collecting contributions for charitable organizations, to businesses that provide information for which the caller must pay.
While the United States and Canada are the most advanced countries in the world in telephone-service technologies, most other industrialized nations are not far
behind. An organization based in Geneva, Switzerland, called the International Telecommunication Union (ITU), works to standardize telephone service throughout the
world. Without its coordinating activities, International Direct Distance Dialing (a service that provides the ability to place international calls without the assistance of an
operator) would have been extremely difficult to implement. Among its other services, the ITU creates an environment in which a special service introduced in one
country can be quickly duplicated elsewhere.

V

THE HISTORY OF THE TELEPHONE

The history of the invention of the telephone is a stormy one. A number of inventors contributed to carrying a voice signal over wires. In 1854 the French inventor
Charles Bourseul suggested that vibrations caused by speaking into a flexible disc or diaphragm might be used to connect and disconnect an electric circuit, thereby
producing similar vibrations in a diaphragm at another location, where the original sound would be reproduced. A few years later, the German physicist Johann Philip
Reis invented an instrument that transmitted musical tones, but it could not reproduce speech. An acoustic communication device that could transmit speech was
developed around 1860 by an Italian American inventor, Antonio Meucci. The first to achieve commercial success and inaugurate widespread use of the telephone,
however, was a Scottish-born American inventor, Alexander Graham Bell, a speech teacher in Boston, Massachusetts.
Bell had built an experimental telegraph, which began to function strangely one day because a part had come loose. The accident gave Bell insight into how voices could
be reproduced at a distance, and he constructed a transmitter and a receiver, for which he received a patent on March 7, 1876. On March 10, 1876, as he and his
assistant, Thomas A. Watson, were preparing to test the mechanism, Bell spilled some acid on himself. In another room, Watson, next to the receiver, heard clearly the
first telephone message: "Mr. Watson, come here; I want you."
A few hours after Bell had patented his invention, another American inventor, Elisha Gray, filed a document called a caveat with the U.S. Patent Office, announcing that
he was well on his way to inventing a telephone. Other inventors, including Meucci and Amos E. Dolbear, also made claim to having invented the telephone. Lawsuits
were filed by various individuals, and Bell's claim to being the inventor of the first telephone had to be defended in court some 600 times. Gray's case was decided in
Bell's favor. Meucci's case was never resolved because Meucci died before it reached the Supreme Court of the United States.

A

Advances in Technology

After the invention of the telephone instrument itself, the second greatest technological advance in the industry may have been the invention of automatic switching.
The first automatic exchanges were called Strowger switches, after Almon Brown Strowger, an undertaker in Kansas City, Missouri, who invented the system because he
thought his town's human operators were steering prospective business to his competitors. Strowger received a patent for the switches in 1891.
Long-distance telephony was established in small steps. The first step was the introduction of the long-distance telephone, originally a special highly efficient instrument
permanently installed in a telephone company building and used for calling between cities. The invention at the end of the 19th century of the loading coil (a coil of
copper wire wound on an iron core and connected to the cable every mile or so) increased the speaking range to approximately 1,000 miles. Until the 1910s the longdistance service used repeaters, electromechanical devices spaced along the route of the call that amplified and repeated conversations into another long-distance
instrument. The obvious shortcomings of this arrangement were overcome with the invention of the triode vacuum tube, which amplified electrical signals. In 1915
vacuum-tube repeaters were used to initiate service from New York City to San Francisco, California.
The vacuum tube also made possible the development of longwave radio circuits that could span oceans. Sound quality on early radio circuits was poor, and
transmission subject to unpredictable interruption. In the 1950s the technology of the coaxial-cable system was combined with high-reliability vacuum-tube circuits in an
undersea cable linking North America and Europe, greatly improving transmission quality. Unlike the first transatlantic telegraph cable placed in service in 1857, which
failed after two months, the first telephone cable (laid in 1956) served many years before becoming obsolete. The application of digital techniques to transmission, along
with undersea cable and satellites, finally made it possible to link points halfway around the earth with a circuit that had speech quality almost as good as that between
next-door neighbors.
Improved automatic-switching systems followed the gradual improvement in transmission technology. Until Direct Distance Dialing became available, all long-distance
calls still required the assistance of an operator to complete. By adding a three-digit area code in front of the subscriber's old number and developing more
sophisticated common-control-switching machines, it became possible for subscribers to complete their own long-distance calls. Today customer-controlled international
dialing is available between many countries.

B

Evolution of the Telephone Industry

In the late 1800s, the Bell Telephone Company (established in 1877 by Alexander Graham Bell and financial backers Gardiner Greene Hubbard, a lawyer, and Thomas
Sanders, a leather merchant) strongly defended its patents in order to exclude others from the telephone business. After these patents expired in 1893 and 1894,
independent telephone companies were started in many cities and most small towns. A period of consolidation followed in the early 1900s, and eventually about 80
percent of the customers in the United States and many of those in Canada were served by the American Telephone and Telegraph Company (AT&T), which had bought
the Bell Telephone Company in 1900. AT&T sold off its Canadian interests in 1908.
From 1885 to 1887 and from 1907 to 1919 AT&T was headed by Theodore Vail, whose vision shaped the industry for most of the 20th century. At that time, AT&T
included 22 regional operating companies, each providing telephone service to an area comprising a large city, state, or group of states. In addition to owning virtually
all of the long-distance circuits in use in the United States, AT&T owned the Western Electric Company, which manufactured most of the equipment. Such a corporate
combination is called a vertically integrated monopoly because it dominates all facets of a business.
Both the long-distance part of AT&T and the operating companies were considered to be "natural monopolies," and by law were decreed to be the sole provider of
telephone service within a designated area. More than 5,000 independent companies remained, but each independent was also a monopoly with an exclusive service
region. This arrangement reduced the costs associated with more than one company stringing wires in an area, and eliminated the early problems that had arisen when

customers of one company serving a region wished to call customers of another company serving the same area. In exchange for the absence of competition, the
companies were regulated by various levels of government, which told them what services they must provide and what prices they could charge.
During this time, telephone sets were never sold to the customer--they were leased as part of an overall service package that included the telephone, the connecting
lines to the exchange, and the capability of calling other customers. In this way, the telephone company was responsible for any problems, whether they arose from
equipment failures, damage to exposed wires, or even the conduct of operators on their job. If a telephone set broke, it was fixed or replaced at no charge.
Since stringing wires between exchanges and users was a major part of the cost of providing telephone service, especially in rural environments, early residential
subscribers often shared the same line. These were called party lines--as opposed to private, or single-party, lines. When one subscriber on a party line was making a
telephone call, the other parties on the line could not use the line. Unfortunately, they could listen to the conversation, thereby compromising its privacy. Such
arrangements also meant that, unless special equipment was used, all the telephones on the line would ring whenever there was a call for any of the parties. Each party
had a distinct combination of short and long rings to indicate whether the call was for that house or another party.
Business telephones were usually private lines. A business could not afford to have its service blocked by another user. This meant that business service was more
expensive than residential service. Businesses continued to be charged more for their private lines than were subscribers with private lines in homes. This subsidization
of telephones in homes permeated the government-regulated rate structure of the telephone industry until about 1980. Long-distance service was priced artificially
high, and the consequent extra revenues to the telephone company were used to keep the price of residential service artificially low.
While most consumers were happy with the control of all equipment by the telephone companies, some were not. Also, because of strong vertical integration within
AT&T, the purchase of equipment from independent manufacturers was tightly controlled. AT&T initially refused to allow the independently manufactured Carterphone, a
device that linked two-way-radio equipment to a telephone, to be connected to its network. After protracted lawsuits, AT&T agreed in 1968 to allow the connection of
independently manufactured telephones to its network, provided they met legal standards set by the Federal Communications Commission (FCC). While the AT&T
agreement did not directly involve the other telephone companies in the country, over time the entire industry followed AT&T's lead.
In 1974 MCI Communications Corporation challenged AT&T about its right to maintain a monopoly over long-distance service. Antitrust proceedings were brought, and
eventually settled in 1982 in a consent decree that brought about the breakup of AT&T. In a consent decree, the federal government agrees to stop proceedings
against a company in return for restrictions on or changes in the company.
The antitrust proceedings were dropped when AT&T agreed to sell off its local operating companies, retaining the long-distance network and manufacturing companies.
The former AT&T operating companies were regrouped into seven Regional Holding Companies (RHCs), which were initially restricted from engaging in any business
other than telephone service within their assigned service area. The RHCs promptly began sidestepping these restrictions by setting up subsidiaries to operate in the
unregulated environment and seeking legislation to further remove restrictions. At the same time, alternate long-distance carriers, such as MCI and Sprint, sought
legislation to keep AT&T under as much regulation as possible while freeing themselves from any regulation.

C

The Telephone Industry Today

In 1996 the U.S. government enacted the Telecommunications Reform Act, which removed government rules preventing local and long-distance phone companies, cable
television operators, broadcasters, and wireless services from directly competing with one another. The act spurred consolidation in the industry, as regional companies
joined forces to create telecommunications giants that provided telephone, wireless, cable, and Internet services.
In other countries, until the 1990s, most of the telephone companies were owned by each nation's central government and operated as part of the post office, an
arrangement that inevitably led to tight control. Many countries are now privatizing telephone service. In order to escape government regulation at home, U.S.
companies are investing heavily in the phone systems of other countries. For example, in 1995 AT&T announced it would attempt to gain a share of the market for
telephone services in India. In a reverse trend, European companies are investing in U.S. long-distance carriers.
Other major markets for telephone companies are opening up around the globe as the developing world becomes more technologically advanced. Nonindustrial
countries are now trying to leapfrog their development by encouraging private companies to install only the latest technology. In remote places in India and Africa, the
use of solar cells is now making it possible to introduce telephones in areas still without electricity.

VI

RECENT DEVELOPMENTS

The introduction of radio into the telephone set has been the most important recent development in telephone technology, permitting first the cordless phone and now
the cellular phone. In addition to regular telephone service, modern cellular phones also provide wireless Internet connections, enabling users to send and receive
electronic mail and search the World Wide Web. Cell phones have taken on major importance in some developing countries where landlines for telephones often do not
exist outside of large cities. In remote rural areas an individual who owns a cell phone may charge a small fee to let others use the phone service. Cell phone service can
have major economic impacts in impoverished regions, allowing access to banking, providing information on prices of crops, and establishing small-business contacts.
Answering machines and phones with dials that remember several stored numbers (repertory dials) have been available for decades, but because of their expense and
unreliability were never as popular as they are today. Multifunctional telephones that use microprocessors and integrated circuits have overcome both these barriers to
make repertory dials a standard feature in most phones sold today. Many multifunctional telephones also include automatic answering and message-recording
capability.
Videophones are devices that use a miniature video camera to send images as well as voice communication. Videophones can be connected to regular telephone lines or
their messages can be sent via wireless technology. Since the transmission of a picture requires much more bandwidth (a measure of the amount of data a system can
transmit per period of time) than the transmission of voice, the high cost of transmission facilities has limited the use of videophone service. This problem is being
overcome by technologies that compress the video information, and by the steadily declining cost of transmission and video-terminal equipment. Video service is now
used to hold business "teleconferences" between groups in distant cities using high-capacity transmission paths with wide bandwidth. Videophones suitable for
conversations between individuals over the normal network are commercially available, but because they provide a picture inferior to that of a television set, have not
proven very popular. Television news organizations adopted the use of videophones to cover breaking news stories in remote areas. Their use escalated in 2001 during
the U.S. war against terrorists and the Taliban regime in Afghanistan.
Telecommunications companies are rapidly expanding their use of digital technology, such as Digital Subscriber Line (DSL) or Integrated Services Digital Network
(ISDN), to allow users to get more information faster over the telephone. Telecommunications companies are also investing heavily in fiber optic cable to meet the everincreasing demand for increased bandwidth.
Telephone service over the Internet using a computer or special equipment has grown in popularity. Called Voice over Internet Protocol (VoIP), the technology requires
a broadband Internet connection but can send calls that are received by someone using an analog phone line. Special adapter boxes also allow calls over the Internet

from a regular analog telephone. Long distance and international calls can be transmitted at much lower cost depending on the service.
As bandwidth continues to improve, an instrument that functions as a telephone, computer, and television becomes more commercially viable. Such a device is now
available, but its cost will likely limit its widespread use in the early part of the 21st century.
As portable devices with computer components and expanded memory capacity become more versatile, phone service can be combined with wireless access to the
Internet and media player features. The introduction of the Apple iPhone in 2007 marked a trend toward lightweight, handheld multipurpose devices. The iPhone can
function as a mobile phone, a camera, a media player, and a voicemail, e-mail, and text messaging device, as well as a computer with Wi-Fi access to the World Wide
Web.

Contributed By:
Richard M. Rickert
Microsoft ® Encarta ® 2009. © 1993-2008 Microsoft Corporation. All rights reserved.